100HP Wirtgen W5/20X2 18mm Tip 40 HRC Road Milling Bits
100HP Wirtgen W5/20X2 18mm Tip 40 HRC Road Milling Bits
Tlhaloso
| Mofuta: | Road Milling Carbide Picks | Lebitso le Leng: | Wirtgen Cutting Bits |
|---|---|---|---|
| Tlhahisoleseding: | Tungsten Carbide | Shank Diameter: | 20mm, Ntle le Puller Groove |
| Keletso Diameter: | 18mm | Sebopeho sa Keletso: | Cap-Shaped |
| Kopo: | Ho Tlosa Lera la Asphalt | Mechini: | Bakeng sa 100HP le Mochini o Monyane o Tlase oa ho sila |
| Leseli le Phahameng: | Wirtgen W5/20X2 Road Milling Bits, 18mm malebela a Tsela ea ho Milling Bits, Likhetho tsa 40HRC tsa ho sila litsela | ||
W5/20 Asphalt Pavement e Tlosa Bits ea ho Hala Bakeng sa 100HP le Mochini o Sehang o Tlaase
1. Road Milling Bits Tlhaloso
Likotoana tsa ho sila litseleng li boetse li tsejoa e le sekontiri sa asphalt le konkreite, likhetho tsa moralo oa litsela, meno a sehang mochini oa ho sila, tse sebelisoang e le likarolo tsa mochini oa ho sila tseleng kahong ea litsela.Bit e kentsoe moqomong oa ho sila oa mochini o silang ebe o khaola bokaholimo ba tsela.Likotoana li na le mefuta e 'meli, likotoana tsa asphalt le likotoana tsa konkreite.Ho ea ka boima bo fapaneng ba tsela e nang le likotoana tse fapaneng.
'Mele oa tšepe oa alloy, o entsoeng ka thepa ea ASTM4142 kapa 42CrMo, kalafo ea mocheso ka thata-thata ea 40-44HRC, e na le boima bo phahameng le sebopeho se ts'oarehang. Keletso e nang le boima bo kaholimo ho 50 HRC e entsoe ka Low press Sintered, le Kereiti e Loketseng e Khethiloeng ho ea ka Morero oa Morero, ke ho etsa bonnete ba hore tshebetso e ntle nakong ya tshebetso.
SW5/20 ke ntlha e nang le sebopeho sa carbide bakeng sa ho tlosa likarolo tsa asphalt.Bophara ba shank ke 20mm, boholo ba carbide ke 18 x 10mm, bo khothaletsoa bakeng sa mochini o tlase oa Horsepower 1m ka morao oa mochini o monyane oa Wirtgen, Dynapac, Cat, Kennametal le Sanvik.
2. Tlhaloso ea Meno ea ho Tlōla
| Mofuta | Tlhaloso
|
| SW5/20 | Ha e bapisoa le Wirtgen W5/20X2
|
| Sesebelisoa | Keletso ea caride e nang le sebopeho sa cap bakeng sa ho tlosa likarolo tsa asphalt. |
| Boholo ba Shank | E tšoaretsoe ka har'a sets'oants'o sa lithulusi tse nang le shank bophara ba 20mm |
| Boima ba carbide ka khetho | 26g
|
| Bongata ka lebokose la lithulusi | 50 likotoana
|
| Boima ka lebokose la lisebelisoa | 16kg
|
3. Lethathamo la Likhetho tsa Asphalt Road Milling
4. Sebopeho sa Milling Bits
- Lehare la asphalt le theko e boima, le loketseng sebaka se seholo sa ho sila ka tsela e bonolo;
- Hlooho e telele, e matsutla-tsutla ea tungsten carbide bakeng sa ts'ebetso ea mochini o silang o mahareng le o moholo ka;
- Ts'ebetso ea welding ea profeshenale e tiisa matla a phahameng a thipa ea tšepe ea tungsten carbide le khokahano ea 'mele;
- Tungsten carbide tip radian sebopeho se utloahalang, sebopeho sa lehare, se ntlafatsa bokhoni ba sekontiri se robehileng;
- Lintho tse thata tsa 'mele oa sehahi le sebopeho se etselitsoeng ho netefatsa bophelo ba sesebelisoa;
- Bophara ba ka ntle ba li-spacers tse 45mm bo fokotsa ho roala ha thipa;
- Moralo oa mochini o hlatsoang lehare o thusa ho potoloha ha hlooho hantle;
- Sehlahla se teteaneng se nang le tšepe ea boleng bo holimo, ho boloka tsitsipano e tšoarellang nako e telele;
- Liaparo tsa pretension le bushing surface, keletso e potlakileng le e bonolo molemong oa ho kenya;
5. Carbide Khetha Sebopeho
6. Mofuta oa Mechini ea ho Tlisa
W5/20 e ka sebelisoa mecheng e menyenyane ea ho sila ea HP, joalo ka W60 W100(L), W100(H), W100R, W130H.
